Visioneer 9650 - Manual (Page 10)

T HE V ISIONEER 9650 S CANNER 3
Document Cover—Protects the document from light and contamination during scanning.
Document Pad—Helps to secure the document in place on the scanner glass.
Reference Frame—Place items face down within this frame. Markings on the border of the
frame show where to align various paper sizes.
Glass—Place items face down aligned at the upper left corner of the glass.
Paper Stop—Holds items in place as they are ejected from the Automatic Document Feeder.
Adjust the stop for either letter-sized or legal-sized pages.
Paper Guide Extension—Unfolds to support multiple pages to scan.
Paper Guide—Holds pages in place. Adjust to fit the size of the paper to scan.
Automatic Document Feeder (ADF)—Feeds a stack of pages onto the glass for scanning.
The ADF can hold up to 50 pages at a time.
Lock—Locks or unlocks the scanning head; located on the underside of the scanner.
Status Lights—Shows the scanner’s status. Blinking Green Ready light: scanner is preparing
itself or the lamp is warming up. Steady Green Ready light: the scanner is on and ready to
scan. Blinking Check light: the hardware is not ready to scan; see “Troubleshooting” on
page 140 for additional details.
USB Port—Connects the scanner to the computer.
ADF Port—Connects the ADF cable from the Automatic Document Feeder to the scanner.
Power Jack—Connects the power cord to the scanner.
Power On/Off Switch—Turns the scanner’s power on and off.
ADF Cable—Connects the ADF to the scanner body. The cable provides power to the ADF
and must be plugged in for it to operate.