Visioneer 9650 - Manual (Page 114)

S CANNING FROM THE TWAIN A DVANCED I NTERFACE 107
A
DJUSTING THE
B
RIGHTNESS AND
C
ONTRAST
Sometimes an item is scanned with the brightness and contrast set to be
too light or too dark. For example, a note written with a light pencil
may need to be scanned darker to improve legibility.
The following figure shows the brightness and contrast options.
Contrast is only available for Color and Gray Scale configurations.
To adjust the brightness and contrast:
1. Drag the Brightness slider to the left to make the item darker or to
the right to make the item lighter.
2. Drag the Contrast slider to the left to decrease the contrast or to
the right to increase the contrast.
You can also type a number directly into the brightness or contrast
setting boxes, or click the up and down arrows next to the box to
increase or decrease the setting.
3. Click Reset to return the settings to their original numbers.