Visioneer 9650 - Manual (Page 116)

S CANNING FROM THE TWAIN A DVANCED I NTERFACE 109
A
DJUSTING
I
NPUT
S
IZE
You can scan documents up to 8.5" x 14" in the Automatic Document
Feeder, or up to 8.5" x 11.69" when using the Flatbed glass, but you can
select other scan sizes, or adjust the input size to scan only specific
sections of an image. For example, if you’re scanning a photograph and
want to focus on one section, adjusting the input size removes the rest of
the photograph from the final scanned image.
The following figure shows the input size options.
To manually set the image size:
1. Select the image size from the menu.
The dotted outline shows the selected area in the image.
The following figure shows an example of a manually selected area.