VTech I6785 - Manual (Page 16)

www vtechphones com 16
Conference call
It is possible to establish a conference call between two handsets and
the external line
While one handset is already connected to the external line, the other
handset can join the call by pressing A conference call will be
immediately established, both handsets will show:
Find handset
• To locate a misplaced handset, press FIND HANDSET on the base to
page all system handsets
• To end the page at the base, press FIND HANDSET again
• To end the page at the handset, press , SPEAKER, or any dial pad
key (0-9, *, #)
Handset operation
PHONE 00:00:25
** PAGING **
• For the FIND
HANDSET
function to work,
the system
handsets need
to be in idle (off)
mode
Call transfer
• While on an external call, any system handset (HS1) can transfer the call to another system handset
(HS2) by pressing INT The external call is put on hold automatically Then select the handset
number to be transferred
• HS2 will ring and the screen will show HS1 IS CALLING
• Pick up the intercom call on HS2 by pressing /FLASH
• An intercom call is established and HS1 can communicate with HS2 prior to the external call being
transferred CALL TRANSFERRED will briefly display on HS1.
If the transferred call is not answered within 100 seconds, the external call will be returned to HS1
and the screen will show CALL BACK
Voice mail
If you subscribe to voice mail service provided by your telephone company, you can
receive voice mail messages from callers When you have a new voice mail, the
screen will display NEW VOICE MAIL, and the voice mail indicator will flash.
On how to access your voice mail, contact your local telephone company for
further instruction
HANDSET 1
NEW VOICE MAIL