VTech I6785 - Manual (Page 25)

www vtechphones com 25
B
as
ic
o
pe
ra
tio
n
Handset settings
• The handset will
not ring when a
call comes in if
ringer volume is in
the lowest setting
Ringer volume
• From the idle (off) mode, press SEL then or until RINGER
VOLUME is shown
• Press SEL The current ringer volume will be shown:
• Press and or enter a digit (0 through 6) to the desired ringer
volume The current ring tone will play and the volume bar is increased
or decreased each time the setting is adjusted At the lowest setting the
display will show:
- OR -
• From idle (off) mode, press +/- volume control keys on the side of
handset will directly go to the RINGER VOLUME menu
• Press and to the desired ringer volume Ringer volume will be
adjusted
Ring tone
• From the idle (off) mode, press SEL then or until RINGER TONE
is displayed
• Press SEL You can then use or or enter a digit (0 through 9) to
sample the ring tone
• Press SEL to confirm.
Key tone
• From the idle (off) mode, press SEL then or to KEY TONE
• Press SEL The current setting will be shown Press or to scroll
to ON or OFF When set to ON, the handset will emit a beep whenever
a key is pressed
• When the desired option is shown, press SEL