Visioneer Patriot 780 - Manual (Page 132)

S CANNING WITH THE WIA I NTERFACE 125
4. If you’re scanning from the Automatic Document Feeder, select a
paper size from the Page Size list.
If you’re scanning from the Flatbed glass, you can change the size of
the scanned image after seeing a preview.
5. Click Preview to preview the image before scanning.
The image is displayed on the right side of the window.
6. Adjust settings of the previewed image as desired:
■ Change the button selection for the type of image.
■ Adjust the custom settings; refer to the next section, “Fine
Tuning Your Scans”.
■ If you’re scanning from the Flatbed, change the size of the
scanned image. To do this, click and hold the mouse pointer over
one of the four sizing-boxes on the corners of the previewed
image. Then drag the box to increase or decrease the size of the
image.
7. Preview the image again. When you are satisfied with the image,
click the Scan button.
Note: If you preview when scanning a stack of documents, the first
page of the stack feeds through the ADF for the preview. After
adjusting the scanner settings, replace that page on the stack so it is
scanned with the rest of the pages.