Visioneer Patriot 780 - Manual (Page 84)

C ONFIGURING THE O NE T OUCH B UTTONS 77
To configure before scanning:
1. Open the OneTouch Properties window.
2. Select the scan configuration Configure Before Scan.
3. Right-click on Configure Before Scan and choose an interface to
use for configuring before scanning.
TWAIN—The TWAIN Interface opens for you to make changes
prior to scanning. See “Scanning with the TWAIN Interface” on
page 104.
ISIS—The ISIS Interface opens for you to make changes prior to
scanning. See “Scanning with the ISIS Interface” on page 129.
WIA—The Windows Image Acquisition Interface (WIA) opens for
you to make changes prior to scanning (available on Windows XP
only). See “Scanning with the WIA Interface” on page 123.
4. Click OK or Apply on the OneTouch Properties window.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the
menu, and choose
the interface to use
for scanning.