Visioneer Patriot 780 - Manual (Page 15)

8 V ISIONEER P ATRIOT 780 S CANNER U SER ’ S G UIDE
8. Slide the Scanner Locking Tab to its unlocked position.
9. Plug the ADF cable into the ADF port. Make sure the ADF cable is
securely plugged into the port. The ADF will not function properly
if the ADF cable is loose or unplugged.
10. When you’re finished assembling the scanner, place it on a level
surface on your desk. If the scanner is on an uneven surface, it may
stall when scanning from the Flatbed.
11. Proceed to “Step 2: Install the Software.”
Note: The Locking Tab protects the scanner’s scan head by holding it
securely in position. Lock the scanner when transporting it from one
location to another, but remember to unlock it before scanning. The
scanner will not scan when locked.