Visioneer Patriot 780 - Manual (Page 45)

38 V ISIONEER P ATRIOT 780 S CANNER U SER ’ S G UIDE
The settings on the OneTouch Properties window are:
Select Destination—The list of applications that can open to display
the scanned image. To configure the list of available applications, click
the Options tab at the top of the dialog box and select the desired
options. See “Selecting Options for the OneTouch Properties Window”
on page 56 for more information.
To make sure all of your computer’s Destination Applications are linked
to OneTouch 4.0, click the Refresh button.
Select Configuration—The list of available scan configurations. The
configuration settings include: scanning mode, resolution (dpi), page
size, brightness (Br), contrast (Cr), color saturation, hue, and gamma.
To see a selected scan configuration’s settings, click its icon. Click the
icon again to close the detailed information.
These icons next to each scan configuration indicate the scanning
mode:
Note: Later on, if you install new software that can be used as a
Destination Application, click the Refresh button again to link the
new software to OneTouch 4.0. Note that some software installed on
your computer may be incompatible with OneTouch 4.0.
Incompatible software will not be listed as a Destination Application.
Click the icon of a selected
configuration to view its
settings.
Color. Grayscale. Black and White. Configure
Before Scan.