Visioneer Patriot 780 - Manual (Page 25)

18 V ISIONEER P ATRIOT 780 S CANNER U SER ’ S G UIDE
Your computer then recognizes that a scanner has been plugged into
the USB port and automatically loads the appropriate software to
run the scanner.
The scanner’s status light is green when the scanner and computer
are communicating properly.
Do not proceed until you receive a message that your computer has
found the new hardware, or updated the driver database. If your
computer is running Windows XP, you will see the following message.
4. When you’re certain that the software has completely loaded, return
to the “Complete the installation by connecting your hardware”
window.
5. Click OK.