Swim operating instructions, Initial start up, Displaying time or temperature – Vita Spa xStreamPro User Manual

Page 16: Swim control center

Advertising
background image

SWIM OPERATING INSTRUCTIONS

The xStream Series spas have been designed for your
maximum enjoyment and comfort.

They have been engineered for energy efficiency, and the
ICS

TM

electronic control center allows full programming of

temperature and filtration cycles.

With the ICS

TM

electronic control center you may program

different temperatures for each and every day of the
week, giving you all the tools for maximum comfort and
energy savings.

INITIAL START UP

Your spa has been programmed for your convenience. Once properly connected, the filtration pump and heater will
automatically come on and heat the swimming portion to 85ºF (29ºC) (please confirm this setting has not been
changed during installation). Date and time must be set at this time by following the Swim Programming
Instructions, which also allow all other spa features to be programmed.

The xStream Control Center controls each function directly with a dedicated button. A brief description of each
button is as follows:

Button

Not active

Pressing this button will cycle the therapy
jets through a soothing “soaking” mode,
to an invigorating “therapy” mode and
then off.

Not active

Pressing this button will turn
the top swim jets on and then
off.

Pressing this button will turn the Badu
jets on and then off.

Pressing this button will turn
the Badu jets on and then off.

Pressing this button will turn
the bottom swim jets on and
then off.

Not active

Not active

This button operates the lights. Refer to the “TURNING ON THE LIGHT” section for operating instructions.
For spas equipped with Digichromium option, refer to “AQUABRITE/ CHROMATHERAPY” instructions on
page 12 for color and intensity programming.

This button is used to cycle between time and temperature display and also to enter and process
programming functions.

The “UP” button increases the value on display.

The “DOWN” button decreases the value on display.

Not active

DISPLAYING TIME OR TEMPERATURE

Pressing this button will switch the display between current time and current water temperature.

Swim Control Center

Operates functions on swim portion of spa

PAGE 10

Advertising
This manual is related to the following products: