Vita Spa xStreamPro - Manual (Page 28)

3s
8s
Self Test Function not applicable to Swim Packs.
xStream Pro
xStream Duo Pro
xStream
Setup Menu - ADVANCED SETTINGS
DISCLAIMER:
DO NOT ENTER THIS SECTION UNLESS INSTRUCTED BY A
QUALIFIED TECHNICIAN.
DOM EXP
FACTORY DEFAULT SETTINGS
*** IMPROPER CHANGES MAY CAUSE MALFUNCTION AND DAMAGE YOUR SPA! ***
Switches Pump settings:
EXP
²
Unlocked ²
U=US
E=Europe
J=Japan
If display shows AH or ECO, call a service tech.
²
ž Clock: Minutes Set
ž Calendar: Month Set (1~12)
ž Calendar: Day Set (1~31)
ž Calendar: Year Set
The Swim Pack has a Circulation Pump.
Auto-Heat and ECOnomy modes do not
apply.
FACTORY DEFAULT SETTINGS
DOM
or
Rev. Date: 10/9/2008
Not Applicable, should be set to b=-
Power Service Level:
MUST BE S=0 - DO NOT CHANGE!
Warning! Changes to this setting may cause
inadvertent breaker tripping and strain your
power connections.
6h, 12h or 24h
Circulation (filtration) hours:
Heating Days: 1/2/3/4/5/6/7/A
Temperature in ºF or ºC
Switches between ºF and ºC
DOM
Not Applicable, should be set to LS1-
FACTORY DEFAULT SETTINGS
ž Clock: Hours Set
Heat Lock: to ± & to ²
Unlocked
EXP
Country (for FM tuning)
Prime cycle at startup: P=Yes –=No
Notice: When set to P=Pr, pumps run for 2
minutes every time power is fed to the spa.
To exit Programming mode press Jet, Light or Aux button, or wait 10 seconds.
xStream, xStream Pro and xStream Duo Pro Swim Pack Programming Instructions
Panel Lock: to ± & to ²
Display Flip: or
²
ž Switches clock between 12h and 24h
PAGE 22