Vita Spa xStreamPro - Manual (Page 9)

PAGE 3
INSTALLING THE SPA COVER
1. Position the cover squarely over the spa.
2. Position the locks for the tie-downs on the sides of the spa. You
should allow approximately 13mm to 20mm (1/2” to 3/4”) slack
in the straps for ease of insertion into the locks and to allow for
material shrinkage during temperature changes.
3. Using the screws provided, attach the locks and insert the cover
tie-down straps. Utilizing the cover anytime the spa is not in use
will reduce heat loss and thereby reduce the amount of running
time required to make up that loss by the heating system.
Keep cover fastened down at all times when not in use.
DANGER - RISK OF INJURY
To reduce the risk of potential injury:
1. Never leave a spa uncovered or unattended.
2. Never leave a spa cover unlocked.
3. Do not stand, sit, or lie on the cover.
ALWAYS REMOVE SNOW FROM THE COVER. THE
COVER HAS NOT BEEN DESIGNED TO SUSPEND THE
WEIGHT OF WET SNOW.
IF YOUR SPA INCLUDES A COVERLIFTER (DUO & DUOPRO),
PLEASE READ INSTALLATION INSTRUCTIONS INSIDE THE BOX
COVER INSTALLATION
Key
Lock
Screws (2)
Cover
Tie Down
Strap
Position warning label in visible area prior to
entry of spa.
For instructions, please refer to posted warnings
located on page 1
If replacements are needed please contact local
dealer and order using part number:
“0461536 - Warning Label”
WARNING LABEL INSTALLATION
NO DIVING WARNING
DO NOT DIVE INTO SPA.
IT CAN CAUSE HARM OR INJURY.