Vidikron VERSION 50 - Manual (Page 34)

34 Vidikron Vision Model 50 Owner’s Operating Manual
On-Screen Display Menus
Picture Quality
Adjustments Vision Model 50
Picture Adjust
Image Option
Projector Status
Installation
Service
ISF Calibration
Brightness 
Contrast 
Color 
Tint 
Sharpness 
Picture Adjust
Brightness 26
Contrast 15
Color 31
Tint 14
Sharpness 2
Color Temp. 2
Color Select NTSC
To access basic picture quality adjustments, press MENU, select Picture Adjust and press
ENTER. The picture quality sub-menu then appears (see above).
To adjust a setting, highlight it with the ▲ or ▼ button and use the ◄ or ► buttons to
change the setting. When finished, press EXIT.
Select Brightness to adjust the black level of the projected image (0 = minimum;
60 = maximum).
Select Contrast to adjust the white level of the projected image (0 = minimum;
32 = maximum).
Select Color to adjust the color level (saturation) of the projected image (0 = minimum;
64 = maximum).
Select Tint to adjust the hue of the projected image (0 = minimum; 30 = maximum).
Select Sharpness to adjust the sharpness of the projected image (-14 = minimum;
+20 = maximum). This setting has no effect if the Video Filter is set to 0 (refer to the next
section, Image Option).