Pre l iminar y – Vidikron 140/150 User Manual
Page 30
18
Vision Model 140/150 Owner’s Operating Manual
PRE
L
IMINAR
Y
•
Do not drop the remote control or expose it to moisture or high temperature.
•
The remote control may malfunction under a fluorescent lamp. If that occurs, move the
VHD Controller away from the fluorescent lamp.
•
Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the VHD Controller or projector.
•
If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
•
The remote control may fail to operate if the infrared remote sensor is exposed to bright
sunlight or fluorescent lighting.
•
Ambient conditions may possibly impede the operation of the remote control. If this
happens, point the remote control at the VHD Controller, and repeat the operation.