Vidikron 140/150 - Manual (Page 60)

Installation
48 Vision Model 140/150 Owner’s Operating Manual
PRE
L
IMINAR
Y
Navigating the Projector
Menus
Most of the controls for the projector are accessed from within the projector’s menu system.
There are several groups of related functions, with each group selectable from the Main
Menu. Press MENU on the rear keypad or TheaterMaster remote to display this menu.
To select a sub-menu using the remote keypad, do one of the following:
• Press the number key corresponding to the function menu you wish to access, such as 2
for the Picture Quality menu.
• Press or on the directional keypad to highlight the desired option, then press ENTER
or .
The corresponding function menu or pull-down list of further options will then appear.
You navigate the function menus in a similar manner: enter a menu option number for any
numbered option, or use the
and keys to highlight the desired option, then press
ENTER. Extra long menus have a scroll bar on the right; use the arrow keys to access the
remainder of the menu. Locked items or items that do not pertain to the current action or
condition appear dimmed and cannot be selected.
When finished with a function menu, do one of the following:
• Press EXIT to return to the previous screen.
• Press MENU to leave the menu system and return to the presentation.
To set up the Vision 140/150 for use with the VHD Controller, you will use the Channel
Setup, Size and Position, Picture Quality, Installation and Lamp Adjust menus.
Channel Setup The projector stores and automatically recalls up to 50 different channels (source setups) for
a variety of inputs. This memory feature allows you to define and conveniently use a wide
variety of customized setups rather than having to repeatedly re-configure the projector for
different presentations. Each projector input can have several different channels associated
with it.
➤
VIDIKRON VISION 150
1. Size and Position
2. Picture Quality
3. Channel Setup
4. Installation
5. Lamp
Adjust
6. System Info
7. PIP and Switching
8. Test Patterns Off
1. If there is no signal present, all source-dependent adjustments are
disabled.
2. After 15 minutes of inactivity, the projector leaves the menu system
and returns to the presentation.
3. The System Info menu is read-only.
Note
➤