WhisperKool SS7000 - Manual (Page 6)

The unit is set at 55°F at the factory. To raise or lower the temperature set point, press the set
button while at the same time pressing either the arrow up or arrow down button.
Wine Temperature Indicator: A red LED bar will light up when the thermostat is reading the
liquid temperature in the bottle via the probe. This will remain lit and the temperature you see
displayed is what the probe is reading.
LED Screen: Displays your thermostat readings.
Wine Temperature Reading: The temperature the water bottle is registering to the
thermostat.
Temperature SET Indicator: A red LED bar will light up when you are setting the
temperature.
Unit ON Indicator: A red LED bar will light up every time the unit turns on to run a cooling
cycle.
SET Button: Used to set the temperature you want the unit to maintain.
UP Arrow Button: Used with the SET button to set temperature higher. In addition, by pressing
and holding the button it will allow you to see the 5-minute count down.
DOWN Arrow Button: Used with the SET button to set temperature lower.
*Up and Down Arrow Buttons used simultaneously will change the temperature read
out from Fahrenheit to Celsius*
WINE Temperature Indicator
Wine Temperature Reading
LED Screen
1
3
2
4
5 6
7 8
Temperature SET Indicator UP Arrow Button DOWN Arrow Button
Unit ON Indicator SET Temperature Button
Temperature
Precision digital Technology Thermostat
PDT
WINE
ON
SET
55
F
SET
1.
2.
3.
4.
5.
6.
7.
8.
PDT OPERATING INSTRUCTIONS
-6-