WHP Wireless WHP-1100 - Manual (Page 10)

Windows 95/98
step 1. Click Start/Run, type winipcfg, and click OK. The IP
Configuration dialog box will open.
step 2. Select the network adapter you use to connect to the Outdoor
AP. Click Release.
step 3. Click Renew to retrieve new information (IP address, subnet
mask, and default gateway address) from the DHCP server.
Click OK to save the changes and exit the program.
Windows NT 4.0
step 1. Click Start/Programs/Command Prompt. Type ipconfig
/release (with a space after ipconfig) and press Enter.
step 2. Type ipconfig /renew (with a space after ipconfig) and press
Enter to retrieve new information (IP address, subnet mask,
and default gateway address) from the DHCP server.
step 3. Type exit and press Enter.
Windows 2000/XP
step 1. Click Start/Programs/Accessories/Command Prompt. Type
ipconfig /release (with a space after ipconfig) and press Enter.
step 2. Type ipconfig /renew (with a space after ipconfig) and press
Enter to retrieve new information (IP address, subnet mask,
and default gateway address) from the DHCP server.
step 3. Type exit and press Enter.
4 Outdoor Access Point