WHP Wireless WHP-1100 - Manual (Page 37)

Fail Retries – This is the number of times the AP will restart the authentication
process with the client before returning an error.
Enable Reauthentication – If this control is checked, the AP will re-initiate
authentication whenever the specified amount of time has passed.
Enable WEP Key Delivery – If this control is checked, the AP will pass the WEP key
to the client after the authentication procedure has finished. This only applies when
the AP has WEP enabled, EAP-TLS is being used on the RADIUS server as the
authentication method, and the supplicant has been authenticated with the RADIUS
server.
Accounting Options
Figure 20. IEEE 802.1X panel – Accounting Options
Retries – This is the number of times the AP will attempt to resend accounting
information to the server before returning an error.
Enable Interim Update – If this control is checked, the AP will periodically resend
any accounting information to the server. The update time can be set by the user.
Outdoor Access Point 31