WHP Wireless WHP-1100 - Manual (Page 45)

Figure 31. Warning before Factory Reset
Click Yes to return the Outdoor AP to the factory default settings.
Upgrade Firmware
The Outdoor AP’s embedded software is contained in “flash” ROM, and can be
updated over your LAN via the WMS program. To download new embedded
software to the device, click Upgrade Firmware. The Upgrade Firmware dialog box
will open (Figure 32).
Figure 32. Upgrade Firmware dialog box
Browse for the file to be uploaded to the Outdoor AP, or type the path and file name
into the Firmware File field.
The Upgrade button will then become enabled. Click Upgrade to start downloading
the file to the Outdoor AP. The WMS and the Outdoor AP’s built-in Trivial File
Transfer Protocol (TFTP) client/server will load the new executable into the
Outdoor AP’s flash ROM area. If the download activity fails, an error message will
be shown in the message box. Once the file transfer is complete, click Close to close
the window.
Outdoor Access Point 39