WHP Wireless WHP-1100 - Manual (Page 26)

Figure 10. WMS Hosts View windows
Kick Start Function
If for any reason the AP does not yet have a reachable IP address, it can be
discovered, and a suitable IP address assigned to it, using the Kick Start function.
step 1. Click the Kick Start icon (a figure with one leg extended) in the top
toolbar. The WLAN Kick Start window will appear.
step 2. Open the WLAN Kick Start window’s Start menu and choose Find, or
click the Find icon (a pair of binoculars), or press F5. After a few seconds
the MAC addresses of all Kick Start-compatible devices on the network
will appear.
step 3. Select the device to be configured, open the Tools menu and choose
Change IP Settings (or click the Change IP Settings icon).
20 Outdoor Access Point