WHP Wireless WHP-1100 - Manual (Page 47)

Create Host Table via Automatic Discovery
Click Automatic Discovery icon to find all compatible devices. Select the desired
APs and other wireless devices (for example, located in building A). Click the right
mouse button to open the popup menu. Choose Export Host Table to save the Host
Table to a file (for convenience, you can save the Host table on a network disk for
ease of access).
Import Host Table to check device’s availability
Import the Host Table from a file (for convenience, you can retrieve the Host table
on a network disk for the ease of access). Once the Host Table is imported, WMS
will automatically check the availability of APs and other compatible devices listed
in the Host Table. This is an extremely powerful feature to make up for the
inadequacy of Auto-Discovery. Auto-Discovery can only find compatible devices
when they are alive. Failed devices cannot be found via Auto-Discovery. The
devices listed in the Host Table should be available and provide the service. If they
do not exist, WMS can report their absence immediately so that the system
administrator can take immediate action.
New/Edit/Delete a Host Address on Host Table
Click the New Host Address button to open the New/Edit Address dialog box (Figure
34). After enter the Outdoor AP’s IP address, WMS will automatically find the
device and list it on the Host Table. You can also select any Outdoor AP on the table
and click the Remove Host Address button to delete it whenever it is no longer
necessary.
Figure 34. New/Edit Address dialog box
Outdoor Access Point 41