Weider WESY96310 - Manual (Page 19)

19
39. Attach the Front Backrest (41) to the Front
Upright (42) with two 1/4” x 2 1/2” Screws (43)
and two 1/4” Washers (10).
Note: The Backrest
must be oriented as shown.
40. Press a 1 1/2” Square Inner Cap (32) into the
Front Seat Frame (36).
Insert a 1/4” x 2” Carriage Bolt (38) through the
center hole in the Seat Plate (37). Attach the Seat
Plate to the Seat (13) with two 1/4” x 3/4” Screws
(18).
Insert the 1/4” x 2” Carriage Bolt (38) through the
indicated hole in the Front Seat Frame (36).
Tighten a 1/4” Nylon Locknut (2) with a 1/4”
Washer (10) onto the Carriage Bolt.
Attach the other end of the Seat (13) to the Front
Seat Frame (36) with a 1/4” Washer (10) and a
1/4” x 2” Machine Screw (81).
41. Press a 1 1/2” Square Inner Cap (32) into the Leg
Lever (29).
Lubricate the 5/16” x 2 1/4” Bolt (33). Attach the
Leg Lever (29) to the Front Seat Frame (36) with
the Bolt and a 5/16” Nylon Locknut (3).
Insert the 5/16” x 2” Eyebolt (35) into the Leg
Lever (29) from the direction shown. Tighten a
5/16” Washer (8) and a 5/16” Nylon Locknut (3)
onto the Eyebolt.
42. Rest the Front Seat Frame (36) on the indicated
pin in the Front Upright (42). Attach the Front
Seat Frame to the Front Upright with a 5/16” x
2 3/4” Carriage Bolt (14) and the Seat Knob (40).
42
39
41
Thick
End
42
40
41
10
13
38
32
36
10
81
37
2
3
8
3
29
33
35
32
18
43
36
36
42
40
14
Pin