Weider WESY29521 - Manual (Page 15)

15
35. Wrap the Leg Lever Cable (96) around a 90mm
Pulley (38). Attach the Pulley and a Cable Trap
(91) to the Right Upright (6) with an M10 x 95mm
Bolt (98), an M10 Washers (75), and an M10
Nylon Locknut (70).
Be sure the Cable Trap is
turned to hold the Cable in the groove of the
Pulley.
36. Wrap the Leg Lever Cable (96) around a 90mm
Pulley (38). Attach the Pulley to the Double “U”-
Bracket (103) with an M10 x 45mm Bolt (66) and
an M10 Nylon Locknut (70).
34. Attach a 90mm Pulley (38) inside the Right Leg
(73) with an M10 x 70mm Bolt (81), two M10
Washers (75), two 13mm Spacers (34), and an
M10 Nylon Locknut (70).
33. Locate the Leg Lever Cable (96). Route the
eyelet end of the Cable through the Right Leg
(73) and attach it to the Leg Lever (4) with an
M10 x 25mm Shoulder Bolt (99) and an M10
Nylon Locknut (70).
73
4
70
99
96
33
34
34
81
73
38
75
75
70
34
91
38
6
96
98
35
96
66
38
103
70
36
75
70