Weider WESY29521 - Manual (Page 7)

7
7. Set two Weight Bumpers (83) over the indicated
holes in the Center Base (67). Insert the two
Weight Guides (20) into the holes. Attach the
Weight Guides to the Center Base with two M10 x
65mm Bolts (63), four M10 Washers (75), and
two M10 Nylon Locknuts (70).
75
75
75
75
73
70
6
5
60
Short
Side
60
70
5
70 70
83
83
75 75
75
63
75
67
20
7
6. Press a 50mm Square Inner Cap (33) into the
end of the Left Seat Frame (29).
Attach the Left Seat Frame (29) to the Left Leg
(36) with two M10 x 65mm Carriage Bolts (57)
and two M10 Nylon Locknuts (70).
Attach the Left Seat Frame (29) to the Left
Upright (7) with two M10 x 85mm Bolts (60), two
M10 Washers (75), and two M10 Nylon Locknuts
(70).
Do not tighten the M10 Nylon Locknuts (70)
yet.
33
75
75
36
70
70
60
29
60
7
70
6
57
5. Orient the Right Seat Frame (5) with the short
side of the adjustment tube on top. Attach the
Right Seat Frame to the Right Leg (73) with two
M10 x 85mm Bolts (60), two M10 Washers (75),
and two M10 Nylon Locknuts (70).
Attach the Right Seat Frame (5) to the Right
Upright (6) with two M10 x 85mm Bolts (60), two
M10 Washers (75), and two M10 Nylon Locknuts
(70).
Do not tighten the M10 Nylon Locknuts (70)
yet.