Weider WESY29521 - Manual (Page 19)

19
50. Press two 20mm x 40mm Inner Caps (104) and a
25mm x 40mm Inner Cap (105) into the
Adjustable Backrest Frame (101).
Attach a Backrest (15) to the Adjustable Backrest
Frame (101) with four M6 x 16mm Bolts (13).
Insert the Adjustable Backrest Frame (101) into
the Right Upright (6) and secure it with an
Adjustment Knob (102).
Attach the other Backrest (15) and the Left
Upright (not shown) with four M6 x 16mm
Bolts (13).
51. Slide the Long Pad Tube (17) through the hole in
the Right Leg (73). Slide two Foam Pads (18)
onto the ends of the Pad Tube. Press two 19mm
Round Inner Caps (27) into the ends of the Pad
Tube.
Repeat this step with the Short Pad Tube (94)
and the Leg Lever (4).
52. Press a 50mm x 70mm Inner Cap (22) into the
indicated end of the Adjustment Tube (88).
Attach the Leg Press Plate (31) to the Adjustment
Tube (88) with an M8 x 65mm Bolt (89), two M8
Washers (26), and an M8 Nylon Locknut (71).
Attach the Adjustment Tube (88) to the Leg Press
Frame (30) with the Leg Press Pin (87).
Be sure
the Pin is in the locked position around the
Leg Press Frame.
49. Press two 20mm x 40mm Inner Caps (104) and a
25mm x 40mm Inner Cap (105) into an Adjustable
Seat Frame (100).
Attach a Seat (16) to an Adjustable Seat Frame
(100) with two M6 x 16mm Screws (13), an M6 x
33mm Screw (90), and an M6 Washer (35).
Insert the Adjustable Seat Frame (100) into the
Right Seat Frame (5) and secure it with an
Adjustment Knob (102).
Repeat this step with the other Seat (16) and
the Left Seat Frame (not shown).
16
35
90
5
13
104
104
100
105
102
102
105
104
101
104
49
6
15
17
27
73
27
4
18
18
94
13
50
51
26
71
31
22
89
30
87
88
26
52
13
SEAT ASSEMBLY