Wegener Communications 4422 - Manual (Page 41)

Page 41
Page 41 of 72 UTY4422-002
NOTE: When moving through the front panel menus, pressing <ENTER> and <SELECT> at
the same time will move you to the top-level menu. This is an immediate move, and does not
save any changes or inputs.
3.8.5 E-mail
E-mail messages may be sent from the uplink to the UNITY4422 and displayed on the LC
Display.
To view E-mail messages, follow these steps:
1. When an E-mail message is received, the Warning light will be turned “ON” and the
following message will normally be shown on the LC Display:
W A R N I N G :
E M A I L P R E S E N T
2. Press <
•
> or <
¶
> to scroll through the top-level menu until you see the E-mail screen
which will allow you to view the e-mail. See the screen representations below.
NOTE: If the “Warning” message above is not shown, you may reach the E-mail menu by
scrolling through the top level menu until you see the E-mail menu display. If there is no E-mail
message, you will see the following display.
E M A I L : N O N E
If there is an E-mail message, the display in Step 2 will be shown:
E M A I L R E A D : < S E L E C T >
Press <SELECT> to view the first 20 characters of the message on the display. To view more of
the message press <
•
>. You may scroll in either direction by pressing <
•
> or <
¶
>. Pressing
and releasing either of these keys will scroll the message 1 character.
3. When you pass the end of the E-mail message, the following will be displayed:
< - - E N D O F E M A I L - - >