Wegener Communications 4422 - Manual (Page 42)

Page 42
UTY4422-002 Page 42 of 72
4. Press < ENTER >, which will end the current E-mail session, and cause the following
message to display:
R E T U R N
P r e s s < S E L E C T >
5. Pressing <SELECT> will take you out of the E-mail menu, and return you to the top-level
menu. The following message will be displayed:
E M A I L R E A D : < S E L E C T >
C L E A R : < E N T E R >
6. At this point the E-mail is in the buffer, and you may leave it, scroll through it, or clear
(erase) it. You are effectively back at Step 2 (Top Level Menu), with the added option of
“Clearing the message.” This option is not available until you have scrolled through the message
once.
7. If you press <SELECT> you can scroll through the message again. If you stop at this point,
the message remains in the buffer, but any new email message will overwrite the current one.
(See the caution on this page.)
If you press <ENTER> you will erase the E-mail message and remain at the top-level menu.
The following message will be displayed:
E M A I L : N O N E
8. At this point, pressing <
•
> or <
¶
> will allow you to scroll through the top-level menu.
NOTE: When moving through the front panel menus, pressing <ENTER> and <SELECT> at
the same time will move you to the top-level menu. This is an immediate move, and does not
save any changes or inputs.
* * * CAUTION * * *
E-mail messages should be read as soon as possible after receipt,
because each message will be over-written by the next one.