Whirlpool XVT3D424SV - Manual (Page 21)

Controls and Connections
2
9
Replacing the Batteries
1. Remove the battery cover.
2. Insert two AA batteries into the remote control. Make
sure that the (+) and (-) symbols on the batteries
match the (+) and (-) symbols inside the battery
compartment.
3. Replace the battery cover.
• Use only a good quality battery.
• Inserting the battery incorrectly may result in cracking or leakage that may cause a fire or
result in injury.
• Dispose of old or dead batteries in accordance with local hazardous waste regulations.
• Keep batteries away from children and pets.
Activating the Bluetooth Remote Control
Your TV includes a remote control that does not require a direct line of sight to the TV. Because
the remote uses Bluetooth to transmit your commands, as long as you are within range of the TV
(30 feet), the remote will work even if it is not pointed at the TV.
However, until you activate the Bluetooth remote control, the remote will only work when pointed
directly at the TV (30 foot range) with no intervening obstacles.
If you have already activated the remote in the first-time setup using the Setup App, then you do
not have to activate the remote again.
To activate the Bluetooth remote control:
1. Press the MENU button on the remote.
2. Select Bluetooth and press OK.
3. Select Pair Device and press OK.
4. Hold down the Record and Green VIA Shortcut buttons for five seconds.
5. Select Start searching for devices and press OK. The TV begins to search for the remote.
6. When the remote is found, the TV displays a success
message.