Whirlpool XVT3D424SV - Manual (Page 23)

First-T
ime Setup
3
11
Chapter 3: Completing the First-Time Setup
The first time you turn on the TV, the Setup App will guide you through each of the steps
necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed. See Chapter 1: Installing the TV on page 1.
• Your devices should be connected. See Chapter 2: Controls and Connections on page
4.
• If you have a wireless network, have the network key ready.
• If you are connecting to your network with an ethernet cable,
connect it to the ethernet port on the TV.
To complete the first-time setup:
1. Press the Power/Standby button on the remote. The
TV powers on and the Setup App starts.
2. Activate the remote by pressing Record and the
Green VIA Shortcut button for 5 seconds, then
highlight
Begin Activation and press OK.
Wait for the remote to be found.
3. When the remote is found, use the Arrow Up/Down
buttons on the remote to highlight Connect to the
Internet and press OK.