Whirlpool XVT3D424SV - Manual (Page 32)

Using the On-Screen Menu
5
20
SBS - Displays side-by-side 3D.
TB - Displays top/bottom 3D.
Sensio - Displays Sensio 3D.
5. The TV displays, “3D viewing mode enabled. Please wear 3D glasses.” Put on your 3D
glasses and turn them on.
You can also quickly change the 3D display mode by pressing the 3D button on the remote.
Changing the Screen Aspect Ratio
The TV can display images in four different modes: Wide, Zoom, Normal, and Stretch. Each mode
displays the picture differently.
To change the screen aspect ratio:
1. Press the MENU button on the remote.
2. Use the Arrow buttons to highlight the Wide icon.
Press OK.
3. Use the Arrow buttons to highlight your desired
screen mode and press OK:
• Wide mode stretches a 4:3 aspect ratio picture to
the edges of the screen. Since the picture is being
stretched, the display image may appear distorted.
If the program is already formatted for widescreen viewing (1.85:1 or 2.35:1), then black
bars will appear on the top and bottom of the display image.
• Zoom mode expands images with black bars to fit the screen.
• Normal mode preserves an original 4:3 aspect ratio. Since the 4:3 aspect ratio is not
large enough to fill the TV’s screen, black bars are added to the left and right of the
display image.
• Stretch mode expands the display image to fill the screen. Images may appear wider
than intended. If you are watching widescreen (1.85:1 or 2.35:1) content, black bars will
still appear on the top and bottom of the display image.