Whirlpool XVT3D424SV - Manual (Page 36)

Using the On-Screen Menu
5
24
Adjusting the Picture Settings
Your TV display can be adjusted to suit your preferences and viewing conditions.
To adjust the picture settings:
1. Press the MENU button on the remote. The on-screen
menu is displayed.
2. Use the Arrow buttons on the remote to highlight
the TV Settings icon and press OK. The TV Settings
menu is displayed.
3. Use the Up/Down Arrow buttons on the remote to
highlight Picture and press OK. The Picture Settings
menu is displayed.
4. Use the Arrow buttons on the remote to highlight Picture Mode, then use the Left/Right
Arrow buttons to change the picture mode:
• Standard mode sets the various picture settings to values that will produce the best
picture in the most cases. This is the recommended setting.
• Movie mode sets the picture settings to values perfect for watching a movie in a dark
room.
• Game mode optimizes the picture settings for displaying game console output.
• Vivid mode sets the picture settings to values that produce a brighter, more vivid
picture.
• Football, Golf, Basketball, and Baseball modes optimize the picture settings for their
respective sports. Also try these modes for other sports.
• Custom picture mode allows you to manually change each of the picture settings:
Backlight - Adjusts the LED brightness to affect the overall brilliance of the picture.
This option is not available unless Ambient Light Sensor is set to
OFF. See Adjusting
the Advanced Picture Settings on page 25.
Brightness - Adjusts the black level of the picture. When this setting is too low,
the picture may be too dark to distinguish details. When this setting is too high, the
picture may appear faded or washed out.
Contrast - Adjusts the white level of the picture. When this setting is too high,
the picture may appear dark. When this setting is too low, the picture may appear
faded or washed out. If the setting is too high or too low, detail may be difficult to
distinguish in dark or bright areas of the picture.
Color - Adjusts the intensity of the picture colors.
Tint - Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones
in the picture. If flesh appears too orange, reduce the level of color before adjusting
tint.