Whirlpool XVT3D424SV - Manual (Page 43)

Using the On-Screen Menu
5
31
Skipping Channels
After a channel scan is completed, you may find that some channels are too weak to watch
comfortably. There may also be some channels you do not want to view. You can remove these
channels from the TV’s memory with the Skip Channel feature.
Channels that have been removed with the Skip Channel feature can still be viewed if the channel
is entered using the Number Pad. If you wish to completely block a channel from being viewed,
use the parental controls. See Using the Parental Controls.
To remove a channel:
1. From the Tuner Settings menu, highlight Skip
Channel. The Skip Channel menu is displayed.
2. For each channel you wish to remove, use the Up/
Down Arrow buttons on the remote to highlight the
channel and press
OK. An X appears to the right of
each channel you select.
3. When you have selected all of the channels you wish
to remove, press the EXIT button on the remote.
Changing the Audio Language
Some digital free-to-air and cable channels broadcast programs in more than one language. The
TV’s MTS (Multichannel Television Sound) feature allows you to listen to audio in your preferred
language.
Not all programs are broadcast in multiple languages. The MTS feature only works when the
program being viewed is being broadcast in the language you select.
To use the Analog MTS feature:
1. From the Tuner Settings menu, highlight Analog MTS
and press OK. The Analog MTS menu is displayed.
2. Select Mono, Stereo, or SAP (secondary audio
programming). Press OK.
3. Press the EXIT button on the remote.