Whirlpool XVT3D424SV - Manual (Page 42)

Using the On-Screen Menu
5
30
Scanning for Channels
Before the TV can detect and display channels and their associated information, you must scan
for channels. A channel scan may also be necessary when the TV has been moved to an area
where different free-to-air broadcast television channels are available.
1. From the Tuner Settings menu, highlight Auto Channel Scan. The auto channel scan
begins.
2. Wait until the channel scan is 100% complete. Highlight Done and press OK.
3. Press the EXIT button on the remote.
Adding New Channels
Occasionally, you may need to add a new analog channel or add a new range of channels. You
can do this by using the Partial Channel Search and Add Analog Channel options.
To add a range of new channels:
1. From the Tuner Settings menu, highlight Partial
Channel Search. The Partial Channel Search menu is
displayed.
2. Highlight Scan Mode and select the type of channel
you are adding: Analog, Digital, or Analog/Digital.
3. Highlight From Channel and enter the channel from
which you want to begin the scan. (Use the Number
Pad on the remote to enter the channel.)
4. Highlight To Channel and enter the channel to which you want to end the scan. (Use the
Number Pad on the remote to enter the channel.)
5. Highlight Start and press OK. The partial channel search begins.
6. Wait until the partial channel search is 100% complete. Highlight Done and press OK.
7. Press the EXIT button on the remote.
To add a single new analog channel:
1. From the Tuner Settings menu, highlight Add Analog
Channel. The Add Analog Channel menu is displayed.
2. Highlight Enter Channel # and use the Number Pad
on the remote to enter the number of the channel you
are adding.
3. Highlight Add Channel and press OK. The TV scans
for the channel.
4. When the TV is done scanning for the channel, press
the EXIT button on the remote.