Wolf DUAL FUEL RANGES - Manual (Page 14)

C L E A N I N G A N D
M A I N T E N A N C E
If removing the range is necessary
for cleaning or maintenance, shut off
gas supply. Disconnect the gas and
electric supply. After disconnecting
the gas and electric supply, finish
removing the unit for cleaning and
servicing. Reinstall in reverse order
and check gas connection for leaks.
14
S E R V I C E
I N F O R M A T I O N
IMPORTANT NOTE: If the Dual Fuel
Range does not operate properly,
follow these troubleshooting steps:
• Verify that power is being supplied
to the unit.
• Check the electrical connections to
ensure that the installation has been
completed correctly.
• Check that the gas shut-off valve is
turned to the "ON" position.
• Follow troubleshooting procedures
as described in the Wolf Dual Fuel
Ranges Use & Care Information.
• If the appliance still does not work,
contact a Wolf Factory Authorized
Service Center. Do not attempt to
repair the appliance yourself. Wolf is
not responsible for service required to
correct a faulty installation.
To obtain the name and number of
a Wolf Factory Authorized Service
Center, call Wolf Customer Service at
(800) 332-9513 or check our website;
www.wolfappliance.com, or e-mail;
[email protected].
When calling for service, you will
need the range model and serial
numbers. Both numbers are on the
rating plate, located on the bottom of
the control panel assembly just above
the oven door on the far right.
I
M P O R T A N T
I
N F O R M A T I O N
WARNING
Be sure to disconnect the gas
and electric supply before
cleaning or servicing.