Western Telematic CMS-16 - Manual (Page 4)

4.1.2. DC Powered Units ■
4.2. Configure Option Switches
4.2.1. Default Baud Rate (Sw1, Sw2, Sw3) ■
4.2.2. Default Handshake (Sw4, Sw5) ■
4.2.3. Default Response Message Format (Sw6) ■
4.2.4. Default Command Echo (Sw7) ■
❍
4.3. Initialize Unit to Default Settings ❍
4.4. Connecting Devices to the CMS ❍
4.5. Application Example ❍
5. Configuration
5.1. Access to the CMS Command Mode ❍
5.2. System SetUp Ports ❍
5.3. Password Functions
5.3.1. The Supervisor Password ■
5.3.2. The Port Passwords ■
❍
5.4. Defining the Site ID and Supervisor Password ❍
5.5. Port Configuration
5.5.1. Configuration Conventions ■
5.5.2. Port Modes ■
5.5.3. RS232 Port Configuration Menus ■
5.5.4. Network Port Configuration Menu ■
5.5.5. Implementing IP Security ■
❍
5.6. Copying Parameters to All Ports ❍
5.7. Save User Selected Parameters ❍
●
6. The Status Screens
6.1. The Port Status Screen (/S) ❍
6.2. The Port Diagnostics Screen (/SD) ❍
6.3. The Network Status Screen (/SN) ❍
6.4. The Port Parameters Screens (/W) ❍
●
7. Operation
7.1. Any-to-Any Mode
7.1.1. Port Connection and Disconnection
7.1.1.1. Connecting Ports ■
■
❍
●