Western Telematic APS-8M - Manual (Page 69)

11-9
Command Reference Guide
/U Save Parameters
Sends configuration parameters to an ASCII text file as described in Section 9.
Availability: Supervisor Mode Only
Format:
/U [Enter]
Response: The APS-8M will send a series of command lines.
/UF Upgrade Firmware
When new versions of the APS operating firmware become available, this
command is used to update the existing firmware as described in Section 10.
Note that this command will only function at the internal modem port (Port 8)
and at Setup Ports One and Two.
Availability: Supervisor Mode Only
Format:
/UF [Enter]
Response: The APS will display a menu which offers the options to retain
existing APS parameters, default parameters or abort the upgrade procedure.
/UL Unlock All Ports
Unlocks all ports that have been deactivated by the Invalid Access Lockout
Function. When the /UL command is invoked, the APS-8M will unlock all
RS232 ports that are currently in the locked state. For more information on the
Invalid Access Lockout Function, please refer to Section 5.5.4.
Availability: Supervisor Mode Only.
Format:
/UL [Enter]
Response: The APS-8M will unlock all RS232 Ports.
/V Display Password Directory
Displays the Password Directory as described in Section 7.4. Note that the /V
command will not display actual passwords, but will instead read "defined" or
"undefined."
Availability: Supervisor Mode Only.
Format:
/V [Enter]
Response: The unit will display the Password Directory Screen.