Wolfcraft 6151 - Manual (Page 3)

Attach Height Adjustable Legs
(See Figure 1.)
1. Place router table top (A) upside-down on
a flat surface. Take care not to scratch the
table top surface.
2. Attach legs (Q) securely to table top with
16 screws (FF). Use a #3 Phillips screw-
driver to keep from stripping the screw
heads.
3. Decide what height you want your Router
Table to be from the floor.
4. With the “foot” of short leg (P) pointing
upward, align 2 holes in short leg with 2
holes in long leg at appropriate height.
NOTE: Short leg (P) mounts inside of long
leg (Q).
5. Thread 2 carriage bolts (AA) through the
holes in both leg members. Assemble 1
washer (EE) and 1 nut (DD) to each
screw. Tighten nuts.
6. Attach the three remaining legs in the
same manner. In order to obtain the same
height above the floor, use the same hole
position as the first leg you attached.
7. Insert and attach 4 molded “shoes” (Z) to
feet.
8. Level the table by adjusting the short legs
(P) within the slotted mounting holes on
the long legs (Q).
Attach Tool Tray
(See Figure 1.)
1. Align holes in legs to holes in corners of
tool tray.
2. Use 8 carriage bolts (AA), 8 washers
(EE), and 8 nuts (DD) to attach the tray.
Attach Optional Second Shelf
(See Figure 1.)
1. Place shelf corners on each one of the
“brackets” that protrude from the height
adjustable legs (shelf board not provided).
2. Use screws (not provided) to attach the
shelf.
NOTE: After you have completed the basic
assembly, including legs, and shelf, place the
router table right-side up on work surface or floor.
Unpacking and Checking
Contents
Separate all parts from the packing materials
and check them against the “Parts List” in this
manual. Make sure all parts are accounted for
before discarding any of the packing material.
Introduction
Versatile, durable, sensibly priced – wolfcraft ®
offers the finest quality router tables.
Router table features include:
● a unitized fence that allows mounting of
boards up to 8"
● a front-mounted, safety keyed power
switch with two 120-volt receptacles
● Laminate top that provides a smooth,
clean routing surface
● reinforced steel brackets to assure
flatness
● a security guard/dust collector
● a connection for a wet/dry vac for efficient
dust collection
● fence-mounted feather boards
The Model 6151 Router Table also has height
adjustable legs that provide floor mounting
from 32" to 38", a steel storage tray, and a
number of other handy, innovative features.
We are sure you will find your wolfcraft router
table a valuable addition to your workshop.
NOTE: This manual covers assembly instruc-
tions, setup, operation, and parts lists for
Model 6151 Router Table.
Assembling Your Router
Table
Tools Required
#2 and #3 Phillips Screwdriver
Hammer
Adjustable Wrench
3