3 the 802.1q/1p port setting screen – ZyXEL Communications P-660HN-TxA User Manual
Page 169
Advertising
Chapter 13 802.1Q/1P
P-660HN-TxA User’s Guide
169
13.3 The 802.1Q/1P Port Setting Screen
Use this screen to configure the PVID for each port. Click Advanced > 802.1Q/
1P > Port Setting to display the following screen.
Figure 83 Advanced > 802.1Q/1P > Port Setting
Tx Tag
Select Tx Tagging if you want the port to tag all outgoing traffic
trasmitted through this VLAN. You select this if you want to create VLANs
across different devices and not just the ZyXEL Device.
Back
Click this to return to the previous screen without saving.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.
Table 56 Advanced > 802.1Q/1P > Group Setting > Edit (continued)
LABEL
DESCRIPTION
Advertising