ZyXEL Communications P-660HN-TxA User Manual
Page 63
Chapter 5 Internet and Wireless Setup Wizard
P-660HN-TxA User’s Guide
63
2
The next wizard screen varies depending on what mode and encapsulation type
you use. All screens shown are with routing mode. Configure the fields and click
Next to continue. See
for wireless connection wizard
setup
Figure 16 Internet Connection with PPPoE
Multiplexing
Select the multiplexing method used by your ISP from the Multiplex
drop-down list box either VC-based or LLC-based.
Virtual Circuit
ID
VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier) define a
virtual circuit. Refer to the appendix for more information.
VPI
Enter the VPI assigned to you. This field may already be configured.
VCI
Enter the VCI assigned to you. This field may already be configured.
Back
Click this to return to the previous screen without saving.
Next
Click this to continue to the next wizard screen. The next wizard screen
you see depends on what protocol you chose above.
Exit
Click this to close the wizard screen without saving.
Table 7 Internet Access Wizard Setup: ISP Parameters
LABEL
DESCRIPTION