Linux – ZyXEL Communications P-660HN-TxA User Manual

Page 265

Advertising
background image

Appendix A Setting up Your Computer’s IP Address

P-660HN-TxA User’s Guide

265

• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your ZyXEL Device in the Router address box.

5

Click Apply Now and close the window.

6

Turn on your ZyXEL Device and restart your computer (if prompted).

Verifying Settings

Check your TCP/IP properties in the Network window.

Linux

This section shows you how to configure your computer’s TCP/IP settings in Red
Hat Linux 9.0. Procedure, screens and file location may vary depending on your
Linux distribution and release version.

Note: Make sure you are logged in as the root administrator.

Using the K Desktop Environment (KDE)

Follow the steps below to configure your computer IP address using the KDE.

1

Click the Red Hat button (located on the bottom left corner), select System
Setting
and click Network.

Figure 138 Red Hat 9.0: KDE: Network Configuration: Devices

Advertising