ZyXEL Communications P-660HN-TxA User Manual
Page 250
Appendix A Setting up Your Computer’s IP Address
P-660HN-TxA User’s Guide
250
3
Click the DNS Configuration tab.
• If you do not know your DNS information, select Disable DNS.
• If you know your DNS information, select Enable DNS and type the
information in the fields below (you may not need to fill them all in).
Figure 117 Windows 95/98/Me: TCP/IP Properties: DNS Configuration
4
Click the Gateway tab.
• If you do not know your gateway’s IP address, remove previously installed
gateways.
• If you have a gateway IP address, type it in the New gateway field and click
Add.
5
Click OK to save and close the TCP/IP Properties window.
6
Click OK to close the Network window. Insert the Windows CD if prompted.
7
Turn on your ZyXEL Device and restart your computer when prompted.
Verifying Settings
1
Click Start and then Run.
2
In the Run window, type "winipcfg" and then click OK to open the IP
Configuration window.
3
Select your network adapter. You should see your computer's IP address, subnet
mask and default gateway.