ZyXEL Communications P-660HN-TxA - Manual (Page 51)

Chapter 4 Tutorials
P-660HN-TxA User’s Guide
51
To configure a static route to route traffic from N1 to N2:
1
Log into the ZyXEL Device’s Web Configurator in advanced mode.
2
Click Advanced > Static Route.
3
Click Edit on a new rule in the Static Route screen.
4
Configure the Static Route Setup screen using the following settings:
4a
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination,
N2.
4b
Type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
4a
Click Apply.
Now B should be able to receive traffic from A. You may need to additionally
configure B’s firewall settings to allow specific traffic to pass through.
R’s N2 192.168.10.2
B 192.168.10.33
Table 5 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS