1 manually assign a wpa-psk key – ZyXEL Communications P-660HN-TxA User Manual

Page 70

Advertising
background image

Chapter 5 Internet and Wireless Setup Wizard

P-660HN-TxA User’s Guide

70

Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID

and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is
enabled) for wireless communication.

4

This screen varies depending on the security mode you selected in the previous
screen. Fill in the field (if available) and click Next.

5.3.1 Manually Assign a WPA-PSK key

Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to
set up a Pre-Shared Key.

Figure 25 Manually Assign a WPA-PSK key

The following table describes the labels in this screen.

Next

Click this to continue to the next wizard screen.

Exit

Click this to close the wizard screen without saving.

Table 13 Wireless LAN Setup Wizard 2

LABEL

DESCRIPTION

Table 14 Manually Assign a WPA-PSK key

LABEL

DESCRIPTION

Pre-Shared
Key

Type from 8 to 63 case-sensitive ASCII characters. You can set up the most
secure wireless connection by configuring WPA in the wireless LAN screens.
You need to configure an authentication server to do this.

Back

Click this to return to the previous screen without saving.

Next

Click this to continue to the next wizard screen.

Exit

Click this to close the wizard screen without saving.

Advertising