Yamaha MOTIF XS7 EN - Manual (Page 206)

Song Job
MOTIF XS Owner’s Manual 206
V
oice mode
Song mode
P
attern mode
Mixing mode
Master mode
Utility mode
File mode
P
erf
ormance
mode
Sampling
mode 1
Sampling
mode 2
Ref
erence
1 Track
Determines the Song track (01 – 16) to which the Job is
applied.
* The drum instruments of the different note numbers will be
assigned to each of tracks, meaning that the Bass Drum of Track 1
is different from the Bass Drum of Track 2, for example.
Executing the Divide Drum Track overwrites any data previously
existing on the destination tracks 1 – 8. Important data should
always be saved to a USB storage device connected to the USB TO
DEVICE terminal or to a computer connected to the same network
as the MOTIF XS (page 278).
This Job copies data in the specified measures of a track
for creating Arpeggio data. Up to 16 unique note numbers
can be recorded to the Arpeggio track. If more than 16
different note numbers have been recorded to the MIDI
sequence data, the Convert operation reduces the notes in
excess of the limit. Because of this, be careful to record
only up to 16 different notes when you create an Arpeggio,
especially when using all four tracks.
1 Range
Determines the range of measures to be copied to the
Arpeggio data.
Settings: 001 – 999
2 ARP Category (Arpeggio Category)
Determines the Category setting (Main Category and Sub
Category) for the created Arpeggio data. The Main
Categories are listed on page 62.
n You can call up the list and select the desired one by pressing
the [SF6] LIST button. For details, see page 82.
3 ARP No. (Arpeggio number/name)
Determines the User Arpeggio number (001 – 256) and
name as destination. The Arpeggio name can contain up to
20 characters. You can call up the Character List display
by pressing the [SF6] CHAR button and enter the name.
For detailed instructions in naming, refer to “Basic
Operation” on page 82.
Any previous Arpeggio data in this number will be overwritten.
4 Original Notes Root
Determines the root note when the Convert Type of any
track is set to “org notes.”
Settings: C -2 – G8
n You can also set the Key directly from the keyboard, by
holding down the [SF6] KBD button and pressing the desired
key. For details, see page 82.
5 Track
Determines the track of the source Song for each Arpeggio
track.
6 Convert Type
Determines how the MIDI sequence data (of Song tracks)
will be converted to Arpeggio data from the three ways
below. This parameter can be set for each track.
Settings: normal, fixed, org notes
normal
The Arpeggio is played back using only the played note and its octave
notes.
fixed
Playing any note(s) will trigger the same MIDI sequence data.
org notes (original notes)
Basically same as “fixed” with the exception that the Arpeggio
playback notes differ according to the played chord.
This Job copies the Phrase (created in the Pattern mode)
to a specified track of the current Song.
1 Source Pattern, Phrase
Determines the source Pattern and Phrase number.
2 Copy Sample Voice
When this box is checkmarked, Sample Voices assigned to
the source phrase (actually the corresponding Mixing Part)
are copied to the destination track, and are assigned to the
Track 1 Bass Drum
Track 2 Click, Bass Drum, Snare Drum, etc.
Track 3 Snare Drum
Track 4 Brush SD, Side Stick, Hand Clap, etc.
Track 5 Hi Hat
Track 6 Ride Cymbal
Track 7 Tom, Crash/Splash/Chinese Cymbal
Track 8 Percussion, etc.
07: Put Track to Arpeggio
CAUTION
1
2
3
4
5
6
08: Copy Phrase
CAUTION
1
2
3