Default settings for each zone—[f4] preset – Yamaha MOTIF XS7 EN User Manual

Page 256

Advertising
background image

V

oice mode

Song mode

P

attern mode

Mixing mode

Master mode

Utility mode

File mode

P

erf
ormance

mode

Sampling

mode 1

Sampling

mode 2

Ref

erence

Using as a Master Keyboard (Master mode)

MOTIF XS Owner’s Manual

256

2 Int Prog Change (Internal Program Change)

Determines whether or not to transmit Program Change
messages to the internal tone generator.

3 Ext Bank Select (External Bank Select)

Determines whether or not to transmit Bank Select MSB/
LSB messages to the external tone generator via MIDI.

4 Ext Prog Change (External Program Change)

Determines whether or not to transmit Program Change
messages to the external tone generator via MIDI.

MIDI Transmit Switch for the Other messages
—[SF2] Control

From this display, you can determine whether or not MIDI
messages controlling non-Voice-related settings such as
Control Change, Pitch Bend and Channel Aftertouch are
transmitted to the internal/external tone generator.

When you wish to transmit a certain MIDI message from a
certain Zone to the internal/external tone generator,
checkmark the corresponding box.

1 Pitch Bend

MIDI messages generated by using the Pitch Bend Wheel.

2 Ch After Touch (Channel After Touch)

MIDI messages generated by pressing and holding a note
on the keyboard.

3 Modulation Wheel

MIDI messages generated by using the Modulation Wheel.

4 Ribbon Controller

MIDI messages generated by using the Ribbon Controller.

5 Foot Controller 1
6 Foot Controller 2

MIDI messages generated by using the optional Foot
Controller connected to the rear panel.

7 Sustain

MIDI messages generated by using the optional
Footswitch connected to the SUSTAIN jack on the rear
panel.

8 Foot Switch

MIDI messages generated by using the optional
Footswitch connected to the ASSIGNABLE jack on the rear
panel.

9 Knob

MIDI messages generated by using the Knobs.

) Slider

MIDI messages generated by using the Sliders.

! A. Function 1 (Assignable Function 1)

@ A. Function 2 (Assignable Function 2)

MIDI messages generated by using the ASSIGNABLE
FUNCTION buttons.

# Volume/Express (Expression)

MIDI Volume messages generated by using the Knobs and
Sliders.

$ Pan

MIDI Pan messages generated by using the Knobs and
Sliders.

From this display you can make the Voice-related settings
for each Zone which will be transmitted as MIDI messages
automatically when the Master is selected.

1 Bank MSB (Bank Select MSB)
2 Bank LSB (Bank Select LSB)
3 Program Change

Determines the Voice-related settings for each Zone in the
selected Master. These MIDI messages are transmitted to
an external/internal tone generator when the Master is
selected.

Settings:

Bank MSB (Bank Select MSB): 000 – 127
Bank LSB (Bank Select LSB): 000 – 127
Program Change: 001 – 128

1

2 3

5

7

9

!

#

4

6

8

)

@

$

Default Settings for each Zone—[F4]
Preset

1

2 3

5

4

6

Advertising
This manual is related to the following products: