Amplitude, Elements and drum keys, New sounds and new styles of playing – Yamaha MOTIF XS7 EN User Manual

Page 57: Oscillator, Pitch, Filter

Advertising
background image

Basic Structure

MOTIF XS Owner’s Manual

57

Basic Structure

Basic Operation

Connections

Basic Section

normally (with the XA Control parameter settings “normal”
and “legato”).

Authentic note release sound

Conventional synthesizers are not good at realizing the
sound produced when the note of the acoustic instrument
is released. The MOTIF XS realizes the sound produced
when the note of the acoustic instrument is released, by
setting the XA Control parameter of a certain Element to
“key off sound.”

Subtle sound variations for each note played

Conventional synthesizers attempt to reproduce this by
randomly changing the pitch and/or filter. However, this
produces an electronic effect and is different from the real
sound changes on an acoustic instrument. The MOTIF XS
more accurately reproduces these subtle sound variations
by using the XA Control parameter settings, “wave cycle”
and “wave random.”

Switching among different sounds to
recreate the natural performance on an
acoustic instrument

Acoustic instruments have their own unique
characteristics—even specific, unique sounds that are
produced only at certain times in a performance. These
include the flutter tonguing on a flute or playing high
harmonics on an acoustic guitar. The MOTIF XS recreates
these by allowing you to switch between the sounds while
you play—using the ASSIGNABLE FUNCTION buttons and
the XA Control parameter settings, “AF 1 on,” “AF 2 on”
and “all AF off.”

New sounds and new styles of playing

The highly versatile functions above can be applied
effectively not only to acoustic sounds but also to
synthesizer and electronic Voices as well. The XA feature
opens up enormous potential for realizing authentic
sounds, performing expressively and coming up with
creative new styles of playing.

To create sounds such as those described above using
Expanded Articulation, refer to page 113.

Elements and Drum Keys are the smallest “building
blocks” in the MOTIF XS that comprise a Voice; in fact, only
one Element or one Drum Key could be used to create a
Voice. These small sound units can be built, enhanced and
processed by a variety of traditional synthesizer
parameters, such as Oscillator, Pitch Filter, Amplitude, and
LFO (shown below).

Oscillator

This unit outputs the wave which determines the basic
pitch. You can assign the waveform (or basic sound
material) to each Element of a Normal Voice or each Key of
a Drum Voice. In the case of a Normal Voice, you can set
the note range for the Element (the range of notes on the
keyboard over which the Element will sound) as well as the
velocity response (the range of note velocities within which
the Element will sound). In addition, the XA related
parameters can be set in this unit.
Oscillator related parameters can be set in the Oscillator
display (pages 112 and 129).

Pitch

This unit controls the pitch of the sound (wave) output from
the Oscillator. In the case of a Normal Voice, you can
detune separate Elements, apply Pitch Scaling and so on.
Also, by setting the PEG (Pitch Envelope Generator), you
can control how the pitch changes over time.
Pitch related parameters can be set in the Pitch display
(page 114) and Pitch EG display (page 115) of the Voice
Edit mode. Note that Pitch related parameters of a Drum
Voice can be set in the Oscillator display.

Filter

This unit modifies the tone of the sound output from Pitch
by cutting the output of a specific frequency portion of the
sound. Also, by setting the FEG (Filter Envelope
Generator), you can control how the Cutoff Frequency of
the Filter changes over time.
Filter related parameters can be set in the Filter display
(pages 117 and 131), Filter EG display (page 119) and
Filter Scale display (page 121) of the Voice Edit mode.

Amplitude

This unit controls the output level (amplitude) of the sound
output from the Filter block. The signals are then sent at
this level to the Effect block. Also, by setting the AEG
(Amplitude Envelope Generator), you can control how the
volume changes over time.

Elements and Drum Keys

OSC

(Oscillator)

Waveform

(AWM2)

LFO

Low Frequency

Oscillator

PITCH

Controls the

pitch of the

sound.

Pitch EG

(Pitch

Envelope

Generator)

FILTER

Changes the

tonal quality of

the sound

output from the

PITCH unit.

Filter EG

(Filter

Envelope

Generator)

AMP

Controls the out-

put level (ampli-

tude) of the sound

output from the

FILTER unit. The

signals are then

sent at this level to

the Effect block.

Amplitude EG

(Amplitude

Envelope

Generator)

Advertising
This manual is related to the following products: