Protocol dependent ethernet setup, 11 protocol dependent ethernet setup – ZyXEL Communications Prestige 642 User Manual
Page 117

Prestige 642 ADSL Internet Access Router
2-10
Hardware Installation & Setup
Figure 2-11
Menu 3.1 - General Ethernet Setup
If you need to define filters, please read the Filter Set Configuration chapter first, then return to this menu
to define the filter sets.
2.11 Protocol Dependent Ethernet Setup
Depending on the protocols for your applications, you need to configure the respective Ethernet Setup, as
outlined below.
z For TCP/IP Ethernet setup refer to Chapter 3 - Internet Access Application.
z For Novell IPX Ethernet setup refer to Chapter 6 - IPX Configuration.
z For bridging Ethernet setup refer to Chapter 7 - Bridging Setup.
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: