ZyXEL Communications Prestige 642 - Manual (Page 99)

Prestige 642 ADSL Internet Access Router
7-4 Bridging Setup
Timeout (min) Prestige 642 to retain the Ethernet Addr information in its internal tables
while the line is down. If this information is retained, your Prestige 642
will not have to recompile the tables when the line is brought back up.
Once you have completed filling in the Network Layer Options Menu, press [ENTER] to return to
Menu 11.1. Then press [ENTER] at the message [Press ENTER to Confirm…] to save your
configuration, or press [Esc] to cancel.
7.3 Bridge Static Route Setup
Similar to network layer static routes, a bridging static route tells the Prestige 642 about the route to a node
before a connection is established. You configure bridge static routes in Menu 12.3.1, by pressing 3 in menu
12 as shown next.
Figure 7-3 Menu 12.3 - Bridge Static Route Setup
Then select one of the bridge static routes.
Figure 7-4 Menu 12.3.1 - Edit Bridge Static Route
Menu 12.3 - Bridge Static Route Setup
1. ________
2. ________
3. ________
4. ________
Enter selection number:
Menu 12.3.1 - Edit Bridge Static Route
Route #: 21
Route Name=
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Press ENTER to CONFIRM or ESC to CANCEL: