ZyXEL Communications Prestige 642 - Manual (Page 28)

Prestige 642 ADSL Internet Access Router
SNMP Configuration 9-1
Chapter 9
SNMP Configuration
This chapter discusses SNMP (Simple Network Management Protocol) for network management
and monitoring.
9.1 About SNMP
Your Prestige 642 supports SNMP agent functionality, which allows a manager station to manage and
monitor the Prestige through the network. Keep in mind that SNMP is only available if TCP/IP is
configured on your Prestige.
9.2 Configuring SNMP
To configure SNMP, select SNMP Configuration (enter 22) from the Main Menu to open Menu 22 -
SNMP Configuration
, as shown in the figure below. The “community” for Get, Set and Trap fields is
simply SNMP’s terminology for password.
Figure 9-1 Menu 22 - SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: